Ethernet interface

10/100BaseT Ethernet, Auto-MDIX, magnetics not built-in

Serial ports

1 port, CMOS-level.

UART capabilities

Baudrates up to 460'800bps; none/even/odd/mark/space parity and 7/8 bits/character.

Number of I/O lines

8 lines (this does not include the TX and RX lines of the serial port);

all lines are 5V-tolerant;

all 8 lines are combined into an 8-bit port;

2 lines can be used as interrupt lines.

Max. load current for each I/O line

10mA

Flash memory

512 KBytes, 320KBytes are available to store a compiled Tibbo BASIC application;

this memory cannot be used as a flash disk.

EEPROM memory

208 bytes, 200 bytes are available to store application data

Nominal power supply voltage (VCC pin)

DC 3.3V, +/- 5%

Required external reset circuit trip voltage

2.9-3.0V

Operating current (VCC pin)

260mA

Operating temperature

-40 to +80 degrees C

Operating relative humidity

10-90%

Mechanical dimensions (excl. leads)

18.5x16.0x6.5mm

Pin diameter

0.4mm

Packaging

Tray, 30 modules/tray